Divider 120mm without stop, length 285 - 485 mm
OPT-AVD120B+ 0285 le0485
Suitable for a variety of products in larger packages or those that you put in two rows on top of each other on the shelf.
Recommended for:
- soft packs in the household and cosmetics department;
- crisps and other larger packaging;
- sausages in relay or other irregular vacuum packs. In this case, combine with a clear front stop that will keep products from falling out without limiting visibility.
The length can be adapted from 285mm to 485 in 25mm increments.
The dividers can be kit packed with fixing rails and pushers. Depending on the shelf choose fixing rails with magnet or adhesive.
If the products are in unstable packaging and there is a need for fall prevention, you can equip with a front safety stop instead of a front fixing rail. Available with different brow heights.
Colour: Crystal clear
Packaging:
- 24 pcs in a stack
- 96 pcs in a box
You can see how the shelf stacking system works here.
When ordering the equipment there is a short description for assembling the system on the shelf in your store.
- Brand:HL Display AB
- Код:866968-1
You can combine with different options for BRANDING or providing additional product INFORMATION. This will make shopping easier and increase sales. According to your specific goals, we will offer you options.
The separator is part of the HL Display system for slide equipment. The part is resistant at low temperature.
These dividers are suitable for equipping chocolates and confectionery in case of more compressed inter-shelf spaces. Practical tips and photos of completed chocolate and confectionery reference projects can be seen on our blog.
More information can be found in our catalogue.
When fitting out entire categories, please submit an enquiry form or call the office on the numbers listed to receive a comprehensive quotation.
Related products
-
Front rail; with magnet; 1248 mm
OPH taTM25 le1248
Used for mounting dividers on metal horizontal shelves 125 cm long.
Must be placed at the top of the shelf.
This way you can easily make swaps when changing the plan-o-gram in the store or when cleaning the shelves thoroughly.
Not recommended for shelves at an incline. In these cases, use a front rail with mounting tape.Standard colour: transparent
Packaging: 50 pcs. per carton
-
Rear rail; magnet; 1248 mm
OBR+ taTM25 le1248
Rear rail for mounting dividers with magnet. Suitable for standard 125cm long metal shelves.
To be mounted at the back of the shelf.
Also recommended for use in refrigerated environments.
Standard colour: transparent
Packaging: 50 pieces per carton
-
Large back support with magnetic base
GBRN
90x135mm back support with magnetic base.
Suitable for supporting unstable packaging.
We recommend to use with divider system.
It is also possible to place it independently and use it without dividers.
We recommend using it behind large boxes of sweets or other packaging that does not fill to the bottom of the shelf. You can lean just a few packs on this back.
colour: crystal clear
Packaging:
5 pcs per stack
50 pcs. per carton -
Front board 40mm with fixing rail; with magnet; 1248 mm
OFRK340 taTM25 le1248
This board serves to protect the goods from falling. It has a built-in rail for fixing the dividers. The front is 40mm high, it is crystal clear and does not obstruct the visibility of the goods.
Used alone or kit packed with different height dividers and rear fixing bar.
We recommend it for lower merchandise including cosmetics on glass shelves.
Sold by the piece and by carton.
-
Front board 60 mm with fixing rail; double magnet; 1248 mm
OFRK60 taTTM25 le1240
This board serves to protect the goods from falling. It has a built-in rail for fixing the dividers. The front is 60mm high, it is crystal clear and does not obstruct the visibility of the goods.
Used alone or kit packed with different height dividers and rear fixing bar.
We recommend it for lower merchandise including cosmetics on glass shelves.
Sold by the piece and by carton.
-
Equipment for whole salami-type cold meats - kit
Equipment for stacking whole salami-type cold meats - kit
Contains the following items:
- 1 pc. safety board 40mm with built-in fixing rail. Fixed to the shelf with magnet.
- 1 pc. rear fixing rail with magnet
- 8 pcs. 120mm dividers without stop
The parts are kit packed for 1 metal shelf with 7 faces of sausages type "Relay". Length 125 cm and depth from 30 cm to 50 cm.
The equipment ensures
- excellent visibility of all products
- easy loading and stacking of the shelves
- sealing of the retail space.
Our experience shows that the result of using the equipment is a 12% INCREASE IN SALES in this category.
Contact us if your shelves are of other sizes or material. We will customise the kit according to your specifications.
| Файл | Информация |
|---|---|
 | [PDF, 584.9 KB] |