Rear rail with mounting adhesive, 1248 mm
OBR+ taTF19 le1248
Rear rail for mounting dividers with adhesive. Suitable for metal, glass or chipboard shelves.
To be mounted at the back of the shelf.
Suitable for refrigerated environments.
Standard colour: transparent
Packaging: 50 pieces per carton
Rear rail; magnet; 998 mm
OBR+ taTM25 le0998
Rear rail for mounting dividers with magnet. Suitable for standard metal shelves.
To be mounted at the back of the shelf.
Also recommended for use in refrigerated environments.
Standard colour: transparent
Packaging: 50 pieces per carton
Rear rail; magnet; 1248 mm
OBR+ taTM25 le1248
Rear rail for mounting dividers with magnet. Suitable for standard 125cm long metal shelves.
To be mounted at the back of the shelf.
Also recommended for use in refrigerated environments.
Standard colour: transparent
Packaging: 50 pieces per carton
Front board 60 mm with fixing rail; double magnet; 1248 mm
OFRK60 taTTM25 le1240
This board serves to protect the goods from falling. It has a built-in rail for fixing the dividers. The front is 60mm high, it is crystal clear and does not obstruct the visibility of the goods.
Used alone or kit packed with different height dividers and rear fixing bar.
We recommend it for lower merchandise including cosmetics on glass shelves.
Sold by the piece and by carton.
Large back support with magnetic base
GBRN
90x135mm back support with magnetic base.
Suitable for supporting unstable packaging.
We recommend to use with divider system.
It is also possible to place it independently and use it without dividers.
We recommend using it behind large boxes of sweets or other packaging that does not fill to the bottom of the shelf. You can lean just a few packs on this back.
colour: crystal clear
Packaging:
5 pcs per stack
50 pcs. per carton
Large back support - pull system detail
OPRL - pull system detail
The back is part of the pull-tab support system.
This system is suitable for unstable flat packages for larger or heavier products.
Recommended for:
- open refrigerated display for vacuum packed sliced cold meats or packs of frankfurters, sausage, etc.
- chocolates that you want to stack on top of the shelf without maintaining a large shelf stock.
Must be kit packed with base tape and pull tape.
The system is suitable for unsustainable flat packs.
The length of the main and pull strips should match the depth of your shelf.
To equip the refrigerated display case you should allow 10 faces per shelf with a standard length of 125cm.
Colour: crystal clear
Packaging:
- 20 pcs. per stack
- 200 pcs. per carton
Small back support - pull system detail
OPRS - pull system detail
The back is part of the pull-tab support system.
This system is suitable for unstable flat packs for smaller and lighter products.
We recommend it for:
- open refrigerated display case for vacuum packed sliced products with smaller dimensions;
- spices, starches, dry soups, fixings;
- to stack on top of shelf without maintaining large shelf stock.
Must be kit packed with base tape and pull tape.
The system is suitable for unstable flat packs.
The length of the main and pull strips should match the depth of your shelf.
Colour: crystal clear
Packaging:
- 20 pcs. per stack
- 200 pcs. per carton
Tape - pull system detail; 485mm
OPRL-PIN-0485-0488
Pull strip - 485mm long, suitable for shelves 500mm deep.
You can kit pack:
- small or large main bar;
- small or large back support;
The system is suitable for unstable flat packs.
- Sliced products, sausages and others in the refrigerated display case, chocolates - choose large back and main bar.
- Flat packed cheeses and round packs in the refrigerated display case, condiments, fixings etc. - choose a small back and a small base band.
Packaging:
- 20 pcs per stack
- 200 pcs. per carton
Large base - pull system detail
OPSL-0485-0483
Detail of pull-system for 50cm deep shelf
The base bar is part of the support system. Must be kit packed with large back support and pull tape.
The system is suitable for unstable flat packs:
- Sliced products, sausages and others in the refrigerated display case;
- chocolates;
The length of the backing and pull strips should match the depth of your shelf.
Color: transparent
Packaging:
- 20 pcs per stack
- 200 pcs per carton
Small base - pull system detail
OPSS -0285-0485
Pull system detail
You can adjust its length for shelves from 300 to 500 mm deep through 50 mm increments.
The main bar is part of the support system. Must be kit packed with a small back support and a pull strip.
The system is suitable for non-resistant flat packs - starches, dry soups, condiments, fixings and products in flat packs.
The length of the backing and pull strips should match your shelf depth.
Packaging:
- 20 pcs. per stack
- 200 pcs. per carton