L-stop 35mm Shelf Divider, length 185 - 410 mm

OPT-AVD35RBLA-0185-0410

This divider is specialised for cigarettes equipment.

The length can be adapted from 185mm to 410mm in 25mm increments.

The dividers can be kit packed with fixing rails and pushers. Depending on the shelf choose fixing rails with magnet or adhesive. For cigarettes the dividers have to be kit packed with 2 front fixing rails (the end rails at the front and bottom of the shelf are the same).

These dividers have a partial L-stop and you should complete with a spring loaded cigarette pusher without a front board.

Colour: Crystal clear

You can see how the shelf stacking system works here.

When ordering the equipment there is a short description for assembling the system on the shelf in your store.

Brand:HL Display AB
Код:
364989-1

Изпрати на приятел

Оцени продукта

Сравни

Цена без ДДС: 2.83лв.

Цена с ДДС: 3.40лв.

L-stop 35mm Shelf Divider, length 185 - 410 mm

An L-stop divider is placed at the end of the shelf, then a pusher is placed, then a T-stop divider is placed and again a pusher is placed, and so alternate pusher and T-shaped divider until the end of the shelf, where an L-shaped is placed again end delimiter. Everything is clipped to adhesive tape.

Detailed information can also be found in our catalogue.

When equipping entire sections, please submit an inquiry form or call the office at the numbers listed to receive a complete solutions.